Manual metal arc welding to spec, for heavy plate, structural steel and the outdoor work where TIG cannot keep up. Hand-blended root and cap, run by a coded welder with twenty years on the rods.
Scope scales with the project, but these four are the spine of any mma / stick welding engagement with MMA Welding.
MMA on heavy plate, RSJ work, columns and frames where high deposition and a tolerant root run are needed.
Stick handles wind, rust and primer better than gas-shielded processes. Right tool for an outdoor site weld.
Coded work to BS EN ISO 9606-1 procedures where the spec calls for it. Records and certs supplied on request.
Welded in the van with a mobile generator on site, or in the Gravesend workshop on bigger fab jobs.
MMA covers most of the structural range, from around 3 mm plate up to 25 mm and beyond on multi-pass weldments. For very thin sheet TIG is the better choice; for everything else stick is usually the right call.
Yes. Mike holds coded MMA tickets and will weld to BS EN ISO 9606-1 procedures where the spec demands it. Procedure records and weld maps available on request.
Yes. Mobile rig, generator, PPE and the right consumables for the job. The client supplies the steel, we supply the welder, the rods and the certifications.
MMA Welding covers the M25 and South East as a matter of course. Travel beyond on negotiation.